The DF-A0052 is a high speed, 3-band, 5 to 3 channel commutating switch intended for switched elements direction finding applications.
The DF-A0052 is a high-speed, 3-band, 5- to 3-channel commutating switch intended for switched elements direction finding antenna applications. The switch accepts three frequency bands, each with 5 antenna elements, and routes any 3 elements of a selected band of 5 elements to any of the 3 outputs. It is also designed to be mounted internally within the weatherproof cavity of the DF-A0029, DF-A0031 and DF-A0037 direction finding antennas.
The switch comprises 5 parallel channels, each equipped with input power limiters, ESD protection, low noise amplifier and band switch. A calibration band can also be selected, providing a balanced 5-way split of an internally generated or externally supplied calibration signal, for chain and receiver calibration. Each channel features a low-noise amplifier, within the calibration chain, to help overcome switch and cable loss. The switch accepts a very wide input voltage range. It is controlled via hardwired logic lines or an EIA-485 (RS-485) interface. All switching is solid state for rapid commutation and unlimited switching cycles.
|Active / Passive||Active|
|Dimensions (m)||260 mm long160 mm wide100 mm high|
|Maximum VSWR||< 2.5|
|1. End Frequency (MHz)||3600|
|1. Start Frequency (MHz)||1|